CL 600 (140.076) V12-6.0L (120.982) (1998)
A29
Left knock sensors
A30
Right knock sensor
B2/6
Left hot film mass air flow sensor, positioned on right of engine
B2/7
Right hot film mass air flow sensor, positioned on left of engine
B6/2
Left camshaft Hall sensor
B6/3
Right camshaft Hall sensor
B11/9
Left coolant temperature sensor
B11/10
Right coolant temperature sensor
B17/5
Left intake air temperature sensor, positioned on right of engine
B17/6
Right intake air temperature sensor, positioned on left of engine
B24/7
Body acceleration sensor (up to 5/96)
B37
Pedal value sensor
G3/3
Left O2 sensor upstream TWC
G3/4
Right O2 sensor upstream TWC
L5/4
Left crankshaft position sensor
L5/5
Right crankshaft position sensor
M16/3
Right electronic accelerator (EA)/cruise control (CC)/idle speed control (ISC) actuator, positioned on left of engine
M16/4
Left electronic accelerator (EA)/cruise control (CC)/idle speed control (ISC) actuator, positioned on right of engine
N3/11
Left ME-SFI control module
N3/12
Right ME-SFI control module
N16/1
Base module
N22
Automatic air conditioning control module
N47-5
ESP/SPS control module
S9/1
Stop light switch
S40
Cruise control switch
S43
Oil level indicator switch (oil pan on right side)
a
Input signals if left ME-SFI control module (N3/11) not present
CAN
Databus (controller area network)
b
Link through CAN to control modules ETC (N15/3), ESP/SPS (N47-5), RCL (N54), ME-SFI (second bank of cylinders)
ME-SFI Control Unit Output Signals
Motor electronics (ME-SFI) fuel injection and ignition system control module output signals