CL 600 (140.076) V12-6.0L (120.982) (1998)
Note models 129.076, 140.056/057
Insert O-ring (2g), screw on oil reservoir (35) with bolts (35a).
Tightening torque: 8 Nm.
Work step number 40 is omitted.
40. Insert O-ring (2g), mount reservoir (35) on pump housing and screw on with bolts (35a. 4 bolts).
Tightening torque: 8Nm.
Insert filter package (35h) and spring (35g), compress slightly and tighten with new self-locking nut (35e).
Mount end cover (35d) and screw on bleed cap (35c).
After installing the tandem pump (operation no. 46-0710), fill or bleed systems (40-0715). Check tandem pump for operation and leaks, connect
pressure gauge if required and check pump pressure (operation no. 46-3070).