CL 600 (140.076) V12-6.0L (120.982) (1998)
/v12-6.0l_(120.982)/Page-1487001.png)
Drive/Propeller Shaft: Removal and Replacement
Remove/Install Propeller Shaft
REMOVAL
1. Remove exhaust system, refer to Exhaust System
2. Detach exhaust shield (105c) on tunnel
3. Detach exhaust shield (105e) above center muffler
4. Remove hexagon nuts, then cover for fuel pump assembly (115c)
5. Detach retaining bracket for seat belt
6. Detach reinforcement bridge (34)
7. Loosen bolts (7a) of propeller shaft intermediate bearing
