CL 600 (215.378) V12-5.8L (137.970) (2002)
Amplifier: Service and Repair
AR82.62-P-7720I Remove/Install Loudspeaker Amplifier Control Module
AR82.62-P-7720I Remove/Install Loudspeaker Amplifier Control Module
- with CODE (810) Sound system
Shown On Model 220
1
Connect quiescent current retention unit
2
Disconnect ground cable of battery
3
Remove paneling in trunk
NOTE: Floor covering, rear end center assembly paneling and side paneling on left-hand side.
4
Unscrew nuts (2) and bolts (1), remove mounting bracket upwards
5
Disconnect couplings
CAUTION: Do not bend D2B wires.
NOTE: If the sound amplifier (A2/13) is removed for a longer period of time, an adapter must be installed to close off the D2B ring.
6
Detach sound amplifier (A2/13) from mounting bracket.
7
Install in the reverse order.