CL 600 (215.378) V12-5.8L (137.970) (2002)
CD Changer: Service and Repair
AR82.64-P-7507I Remove/Install CD Player With Changer
- with CODE (819) 6-disc CD changer
Illustrated On Model 220
1
Connect quiescent current retention unit
2
Disconnect ground lead from battery
3
Remove paneling in trunk
NOTE: Floor covering, covering on rear center section and left side paneling.
4
Unscrew screws (1) and nuts (2) and remove equipment carrier (3)
5
Disconnect connectors
CAUTION: Do not kink D2B leads
NOTE: If the CD player with changer (in trunk) (A2/6) is removed for a longer period of time, it is necessary to install an adapter to complete the
D2B ring.
6
Remove CD changer (in trunk) (A2/6) from equipment carrier
7
Install in opposite order.
8
Check for proper function.