CL 600 (215.378) V12-5.8L (137.970) (2002)
Sun Visor: All Technical Service Bulletins
Interior - Sunblind Chafe Guard/Loose
Date: June 1, 2004
Order No.: P-B-68.50/24
Supersedes:
Group: 68
SUBJECT:
Model 203.040/061/064/065/081/084, up to VIN 571229 with Code 540a (Electric Roller Blind for Rear Window)
Model 215.373/374/375/376/378, up to VIN 043072 with Code 540a (Electric Roller Blind for Rear Window)
Chafe Guard on Rear Window Roller Sun Blind Loose
If you receive customer reports in the above model vehicles with the subject complaint, please perform the below steps to resolve. At high temperatures
caused by solar radiation, the chafe guard may come loose or fall off due to insufficient adhesion. This may cause noise to occur when the roller sun
blind is opened or closed as the side bars of the scissor mechanism cross. The blind may also get stuck on the protruding chafe guard and not retract
completely.
Note:
Do not remove/install/replace the roller sun blind.
1.
Extend roller sun blind and remove chafe guard.
2.
Remove protective strip and adhere felt in the place of the chafe guard
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair.
In Case of Warranty