CL 600 (215.378) V12-5.8L (137.970) (2002)
/v12-5.8l_(137.970)/Page-560001.png)
Low Tire Pressure Indicator: Procedures
GF40.15-P0001-02D Tire pressure monitor (TPM), activation
If the tire pressure is changed by the driver, or if a wheel is replaced or a tire is changed, the set air pressure values must be stored in the TPM control
unit (N88) as nominal monitoring values.
Proceed as follows:
-
Correct the air pressure at each wheel.
-
Switch on ignition (terminal 15).
-
Engine ON or engine OFF.
-
Use the scroll forward/back push-button (S11 Os1) to select the tire pressure monitor system.
-
Press the reset button (1) in the instrument cluster (A1).
-
The previous pressure display changes
