CL 600 (215.378) V12-5.8L (137.970) (2002)
5
Slacken bolt (6) and pull out fuel filter (5) in direction of arrow from retaining clamp (7).
CAUTION: The fuel filter (5) is wrapped for protection against galvanic corrosion with a plastic foil. Do not damage plastic foil when
inserting fuel filter (5) in the retaining clamp (7). Position fuel filter (5) in the retaining clamp (7) in such a way, that the plastic foil
protrudes on both sides of the retaining clamp.
Inspecting
6
Check rubber mount (8, 4 Stuck).
-
Check rubber mount (8) for wear, replace if required.
-
Liquid lubricant (Naphtolen H)
7
Install in the reverse order
DANGER:
-
Risk of accident from vehicle starting off by itself when engine running. Risk of injury as working around the engine during start-up
or while running may result in contusions and burns
-
Secure vehicle to prevent it from moving off by itself.
-
Wear closed and close-fitting work clothes.
-
Do not grasp hot or rotating parts.
8
Start engine and inspect fuel system for leaks
9
Install cover (3) of fuse pump assembly
Special Tools
Clamp, P/N # 000 589 40 37 00
Commercially Available Tools
Commercially Available Tools