CL 600 V12-58L Fuel Rail Component Locations
Fuel Rail: Service and Repair
Remove, Install Fuel Rail With Injectors (ME-SFI)
Removing, installing
DANGER:
-
Risk of explosion from fuel igniting, risk of poisoning from enhaling and swallowing fuel as well as risk of injury to eyes and skin from
contact with fuel.
-
No fire, sparks, naked flames or smoking.
-
Pour fuels only into suitable and appropriately marked containers.
-
Wear protective clothing when handling fuel.
1
Remove air cleaner (1)
2
Remove electronic accelerator pedal actuator (M16/1)
3
Remove ECI mains unit (N91)
4
Unplug connector of electrical connection of right camshaft adjustment valve (Y49/2)
5
Detach hose (2) of crankcase ventilation at right cylinder head and separate at coupling (arrow)
6
Detach vacuum lines at switchover valves (Y32/1) and (Y32/2)
NOTE:
-
Connection diagram intake manifold M137
-
Connection diagram intake manifold M137 (USA)
7
Unclip switchover valves (Y32/1) and (Y32/2) at bracket (3) and unplug connector (arrow) of electrical connection
8
Release fuel pressure through service valve (1/1)
NOTE: Collect fuel.
-
See Special Tools below.
9
Detach fuel feed line (17/2) at fuel rail (17)
NOTE: Collect fuel.
-
Fuel feed line to fuel rail = 38 Nm