CL 600 (215.378) V12-5.8L (137.970) (2002)
Camshaft Position Sensor: Service and Repair
Removing and installing camshaft Hall sensor
Shown On Engine 137 In Model 215
1
Remove air cleaner
2
Remove intake manifold
NOTE: Suspend intake manifold complete with inlet connection, intake air pipes and fuel rail at hood.
CAUTION: The intake manifold must not be disassembled
3
Unplug connector (arrow) of electrical connection of left camshaft Hall sensor (B6/2) and right camshaft Hall sensor (B6/3).
4
Remove camshaft Hall sensors (B6/2, B6/3)
-
Camshaft Hall sensor to cylinder head cover: 7 Nm
5
Install in the reverse order.