CL 600 (215.378) V12-5.8L (137.970) (2002)
Remove/Install
NOTE: O2 sensors upstream TWC
1
Remove air cleaner
2
Separate plug connections of O2 sensors (G3/7x1, G3/8x1) and (G3/9x1, G3/10x1)
3
Remove O2 sensors (G3/B), (G3/9) and (G3/10)
NOTE: Remove from above.
-
O2 sensor to exhaust pipe/exhaust manifold = 55 Nm
-
See Special Tools below.
4
Remove ignition coil module
NOTE: Only for O2 sensor (G3/7)
5
Remove O2 sensor (G3/7)
NOTE: Remove from above.