CL 600 (215.378) V12-5.8L (137.970) (2002)
/v12-5.8l_(137.970)/Page-10001.png)
Keyless Entry Module: Service and Repair
AR80.35-P-0001M Remove/Install Keyless GO Control Module
Illustrated On Model 220
1
Connect quiescent current retention unit
2
Disconnect ground lead from battery
3
Remove paneling in trunk
NOTE: Right side paneling.
4
Unscrew screws (1) and remove keyless Go control module (N69/5)
5
Unlock electrical connectors (2) on Keyless Go control module (N69/5) and remove
6
Install in opposite order.
