CL 600 (215.378) V12-5.8L (137.970) (2002)
Ambient Light Sensor: Service and Repair
AR82.10-P-2400I Remove/Install Daylight Sensor
1
Remove overhead control panel control module.
2
Unclip cover (1)
3
Unclip cover (2)
4
Release clips (4) on left and right
5
Remove automatic light switch daylight sensor (B32/1).
NOTE: Sensor lens is glued to windshield. Do not replace.
6
Disconnect connector (3)
7
Install in opposite order.