CL 600 (215.378) V12-5.8L (137.970) (2002)
Ball Joint: Testing and Inspection
AR33.20-P-0426I Check Follower Joint of Steering Knuckle (Installed)
Checking Follower Joint Of Steering Knuckle Bearing (Installed)
Shown On Model 220
Inspect
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
1
Raise vehicle.
2
Check boot (8f) for cracks and damage.
-
Replace upper transverse control arm (6) if necessary.
3
Check follower joint play
NOTE:
-
By pulling and pushing vigorously on the front wheel, while feeling the follower joint at the same time
-
Replace upper transverse control arm (6) if necessary.