CL 600 (215.378) V12-5.8L (137.970) (2002)
Ride Height Sensor: Service and Repair
AR82.10-P-0005N Remove/Install Rear Axle Level Sensor
Remove/install rear axle level sensor
CAUTION: Replace self-locking nuts and bolts
1
Disconnect connectors (arrow) at rear left and right level sensors (B22/7, B22/10).
2
Unscrew nut (85e) on connecting rod from rear left and right level sensors (B22/7, B22/10)
3
Unscrew bolts (85c) and remove level sensor
CAUTION: Installation: Pay attention to the installation position of link rod!
-
Bolt, level sensor to retaining plate: 4 Nm
4
Install in the reverse order.
5
After replacing the level sensors, calibrate vehicle level with Star Diagnosis (level calibration).