CL 600 (216.376) V12-5.5L Turbo (275.953) (2007)
8
Insert white line (ws) of audio AUX jack wiring harness (1) into contact cavity 15 of black 20-pin contact carrier (6).
9
Pull off soundproofing material (7) in the area of the hole (9) to be made in glove compartment (8).
10
Drill hole (9) with a diameter of 18.5 mm in glove compartment (8) according to dimensions.
The diameter must not be larger than 18.5 mm.
Component Identification
11
Unclip cage (11) using a narrow flat tip screwdriver (10) at audio AUX jack (2).