mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 12624 > < Procedures|Page 12622
Page 6
background image

21. Check whether seal (28) on left front fog lamp (E5/1) and right front fog lamp (E5/2) is seated correctly, if applicable plug.
22. Connect AMG wiring harness (27) for front fog lamp each to left front fog lamp (E5/1) and right front fog lamp (E5/2).

The left front fog lamp (E5/1) and right front fog lamp (E5/2) differ and are marked according to the side of the vehicle (arrows), the AMG wiring
harness (27) for the front fog lamp should point toward the outside in the installed state.

23. Insert left front fog lamp (E5/1) and right front fog lamp (E5/2) at front into front bumper paneling (1), align and fasten using four 4.2 x 13 sheet

metal screws (19) each.

The adjustment bolt should be positioned at bottom.

Shown on right fog lamp (E5/2).

Tighten 4.2 x 13 sheet metal screws (19) with a tightening torque of 3.5 Nm.

24. Insert outer air ducting grate (20) on left and right into front bumper paneling (1, align and fasten with three sheet metal screws (21) each.

Tighten sheet metal screws (21) with a tightening torque of 2 Nm.

Procedures|Page 12624 > < Procedures|Page 12622