CL 600 (216.376) V12-5.5L Turbo (275.953) (2007)
Partially detach the rocker panel cover (arrows, Figure 14) only in the area of the jack support points. Then and push the cover (arrows, Figure 6) to one
side.
6. The damp vehicle side should be treated as follows:
^ Remove rocker panel cover (arrows, Figure 14).
^ Remove all grommets on the lower rocker panel and the grommet in the wheelhouse (arrow, Figure 15). Flush out dirty rocker panel with water.
^ Blow out rocker panel thoroughly with compressed air and preserve rocker panel cavity.
^ Replace drain grommets and reinstall all other grommets.
^ Dry the floor covering or inspect and replace, if necessary.