mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Drive/Propeller Shaft > < Procedures|Page 7199
Page 2
background image

Component Identification

1

Loosen bolts (6) on propeller shaft intermediate bearing and remove if necessary.

On models 221.154/ 156 the front propeller shaft intermediate bearing is mounted to the vehicle underbody with 2 bolts and the rear propeller
shaft intermediate bearing is mounted on the vehicle underbody with 4 bolts.

Shown on propeller shaft intermediate bearing on model 221.171

Drive/Propeller Shaft > < Procedures|Page 7199