CLK 320 (208.365) V6-3.2L (112.940) (1999)
Headlamp Control Module: Service and Repair
Removing And Installing Xenon Headlamp Control Module With Ignition Module
Model 208
DANGER:
-
Parts under high tension Do not touch
-
Do not touch parts conducting high voltage.
-
Persons with electronic implants (e.g. heart pacemakers) should not perform any type of work on the ignition system.
-
High voltage from Xenon headlamps
-
Do not touch parts conducting high voltage.
-
Persons with active electronic implants (e.g. heart pacemakers) should not perform work on Xenon headlamps.
1
Remove headlamp unit
2
Unscrew screws (14) and remove housing cover(1)
3
Unscrew nuts (15)
4
Remove xenon headlamp ignition module (E1n2, E2n2)
5
Unscrew screws (17)
6
Remove housing cover (2) by turning to left
7
Disconnect connector (18)
8
Press out grommet (19) and remove xenon headlamp control module (E1n2, E2n2) with xenon headlamp ignition module (E1n1, E2n1)
9
Reinstall in opposite order
10 Check for proper function