CLK 320 (208.365) V6-3.2L (112.940) (1999)
Rear Knuckle: Removal and Replacement
Remove/install Wheel Carrier
Version Up To 12/97 Or 01/98
Version Up To 12/98 Or 02/98
CAUTION: Installation: Replace self-locking nuts and bolts
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer
CAUTION:
-
Installation: Install camber strut, tension arm, torque strut, track rod and spring link at wheel carrier
-
The rear axle shaft must be horizontal when tightening the nuts.