CLK 320 (208.365) V6-3.2L (112.940) (1999)
NOTE: When refilling, refill with the rest of the specified oil quantity.
5
Shift through the driving stages several times with the vehicle stationary and the engine idling
NOTE: Operate service brakes at the same time
6
Check transmission oil temperature
NOTE:
-
Operate service brakes at the same time. When the transmission is cold, the oil level indicator must be between the "min." and "max." marks,
25 degree C (transmission oil temperature). The exact oil level at 80 degree C (transmission oil temperature) must be between the "min." and
"max." markings.
-
When using the HHT or STAR DIAGNOSIS, the current transmission oil temperature must be read out in one of the selector lever positions R,
D, 4, 3, 2 or 1.
Special Tools
Special Tools
7
Insert oil dipstick as far as the stop and pull out again, read off oil level and repeat if necessary
NOTE: Warm up the transmission, wait at least 2 minutes and check the oil level with the engine running.
CAUTION: If too much transmission oil is added, it is absolutely essential to drain off or extract the surplus. Insufficient and excessive
quantities of oil result in malfunctions and transmission damage.
8
Check oil level again
-
Correct if necessary
9
Fit cap (93) on oil filler pipe and press in new locking pin (93a) until it clicks into place
10
Check transmission for leaks
CAUTION: In the event of oil loss determine and eliminate cause, otherwise it may result in both malfunctions, transmission damage and
serious harm to the environment.