CLK 320 (209.365) V6-3.2L (112.955) (2004)
Using the MB-Info and breakdown assistance button group (S93/6) either the roadside assistance call (symbol is a wrench) or the MB- Info call (symbol
is the letter "i") is initiated by pressing in the corresponding direction. Pressing the MB-Info and breakdown assistance button group (S93/6) for longer
than 0.5 s activates the system. The activated system is indicated by a flashing LED in the MB-Info and breakdown assistance button group (S93/6).
Irrespective of the request, the MB-Info and breakdown assistance button group (S93/6) is input by the emergency call system control unit (N123/4) via
a discrete line. An SMS is sent automatically by the emergency call system control unit (N123/4). At the same time as the SMS is sent, a voice
connection to the service center is established immediately.
GF82.95-P-2003QU Emergency Call Actuation Function
GF82.95-P-2003QU Emergency Call Actuation Function
- with CODE (349) E Call emergency call system
An Emergency-Call emergency call can be triggered manually or automatically.
Manually:
^
via the SOS pushbutton switch (S93/3)
^
For diagnosis purposes with STAR DIAGNOSIS
Automatically:
^
Via the restraint systems control unit (N2/7) in the event of airbag triggering or a severe rear end collision.
^
When the tilting cone sensor (B66) in the E-call control unit (A35/8) records a rollover
Voice connection
After the conversation between person involved in the accident and the rescue headquarters (police, fire department etc. ) has finished, the voice
connection is maintained by an employee of the E-Call center. It can only be terminated by the person involved in the accident himself
Emergency call priority
The information, as to which type of emergency call has been triggered, is entered in the emergency call telegram generated by the E-Call control unit
(A35/8).
The types of actuation have various priorities:
^
Highest priority: Automatic emergency call
^
Lowest priority: Manual emergency call with SOS pushbutton switch (S93/3)
If, when an emergency call is triggered an emergency call of higher priority is already active, this call is brought to a conclusion. The emergency call
with the lower priority is not started.
If an emergency call with lower priority is already active when triggering, this call is interrupted and the emergency call with the higher priority is
started.
GF82.95-P-2004Q Emergency Call Telegram Generation, Function
GF82.95-P-2004Q Emergency Call Telegram Generation, Function
- with CODE (855) TELE AID
- except CODE (498) Japanese version
- except CODE (491) U.S. version
After an emergency call is triggered, the D2B telephone and TELE AID transmitter/receiver (A35/17) automatically generates an emergency call
telegram. It includes the following information:
^
Location of the vehicle (degrees longitude and latitude)
^
Type of emergency call actuation (automatic or manual with the SOS pushbutton switch (S93/3))
^
Crash parameters from restraint systems control unit (N2/7)