mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.95-P-0001-01P TELE AID Position Of the Components|Page 15563 > < GF82.95-P-0001-01P TELE AID Position Of the Components|Page 15561
Page 11
background image

Once a conversation with those affected by the accident has been successfully set up, an emergency call (phone voice connection) is made to the
responsible rescue service (police, fire department etc.).

Then a voice connection (via telephone) is completed from the vehicle to the rescue service. Then the required rescue measures are started.

When initially started the system performs an authorization. Without authorization it is not possible to make an Emergency Call. When authorization is
missing, the Emergency Call system does not operate.

PDC network

The alarm call is routed over the PDC mobile network to the PESC (Public Emergency Service Center).
The PDC network in Japan is nowadays almost universally available.

The system is composed of:

^

D2B-capable vehicle equipment

^

cellular radio network (Personal Digital Cellular)

^

handset

^

alarm call HQ

^

phone antenna (PDC)

^

two emergency antennas (PDC)

The vehicle equipment is composed of the following components:

^

a localizing system (GPS receiver) integrated into the E-call control module (A35/8)

^

a tilting cone sensor integrated into the E-call control module(A35/8) (B66)

^

car phone (PDC module in control module)

^

the available vehicle sensors (crash sensor, wheel rpm sensors)

^

SOS pushbutton switch (S93/3)

GF82.95-P-0003QU Emergency Call (E-Call), Function

GF82.95-P-0003QU Emergency Call (E-call), Function

- with CODE (349) E-Call emergency call system

Emergency call, general

Emergency call (E-Call) is an automatic emergency call system which uses the availability of new technologies, such as vehicle locating via satellite and
telephone, to minimize the consequences of accident.
The emergency call report as well as the exact description of the location are made possible with E-Call, irrespective of human error in stress situations.

Operating procedure

An E-Call emergency call can be triggered automatically or manually. The following actuation procedures should be distinguished:

Type of triggering, automatic:

^

Restraint systems control unit (N2/7)

^

E-call control unit (A35/8) with integral tilting cone sensor (B66)

Type of triggering, manual:

^

By pressing the SOS pushbutton switch (S93/3)

If an alarm is triggered, an emergency call telegram is put together by the E-call control unit (A35/8) which contains information on the severity of the
accident, on the identification of the vehicle, the vehicle position and on the type of alarm triggering. The emergency call telegram is transmitted via the
vehicle's telephone equipment.
In the event of a defective telephone antenna (A2/22) the system automatically changes over to the emergency call system left backup antenna (A2/54) or
emergency call system right backup antenna (A2/55).

When the connection to the person involved in the accident is successfully completed, an emergency call (telephone voice connection) is passed on to the
rescue headquarters responsible (police, fire department etc.).

Then a voice connection (via telephone) is completed from the vehicle to the rescue service. The necessary help measures are introduced as a result of
this.

GF82.95-P-0001-01P TELE AID Position Of the Components|Page 15563 > < GF82.95-P-0001-01P TELE AID Position Of the Components|Page 15561