CLK 320 (209.365) V6-3.2L (112.955) (2004)
/v6-3.2l_(112.955)/Page-3861008.png)
9. Pull seal (4) onto left longitudinal member reinforcement (2).
The longitudinal member reinforcement is labeled with a sticker. Use antifriction agent. Observe installation position of gasket (4). The arrow on
the seal (4) must point upward.
10. Insert left longitudinal member reinforcement (2) into left vehicle longitudinal member.
11. Screw the left longitudinal member reinforcement (2) finger-tight onto the left vehicle longitudinal member with two micro-encapsulated bolts
M10 x 25 (7).
12. Screw the right longitudinal member reinforcement (3) finger-tight onto the right vehicle longitudinal member with two micro-encapsulated bolts
M10 x 25 (7).
