CLK 320 (209.365) V6-3.2L (112.955) (2004)
/v6-3.2l_(112.955)/Page-3878004.png)
Vehicles with Parktronic system (PTS) code 220
10.1. Fasten PTS, front bumper connector (X26/27) to inner section (6) with two expansion rivets (see arrow).
Vehicles with Parktronic system (PTS) code 220
11.1. Connect front bumper PTS sensor unit (A42) and insert into brackets
Before inserting sensors, check decoupling rings, replace if damaged.
Vehicles with headlamp cleaning system, code 600
12.1. Install HCS covers (9) removed from standard bumper with HCS spring (10) into front bumper paneling (1).
For this purpose, press bearing bracket on HCS cover (9) together and position on bearing pins. Then close HCS cover (9) and insert HCS spring
(10) (see bottom figure).
13. Insert tow eye cover removed from standard bumper into front bumper paneling and hook in retainer.
