CLK 320 (209.365) V6-3.2L (112.955) (2004)
-
Pay attention to the correct position of the cap on the front end of the camshaft.
9
Attach camshaft bearing bridge (4)
NOTE: Observe tightening diagram.
10
Rotate camshaft into basic position
11
Fit on camshaft sprocket
NOTE: Take off cable strap (5)!
12
Install camshaft Hall sensor (1)
13
Install chain tensioner (2)
14
Check timing of engine
15
Install cylinder head covers
-
Air cleaner mounted on vehicle.
-
Air cleaner positioned at engine side.