CLK 320 (209.365) V6-3.2L (112.955) (2004)
4
Tighten connecting rod bolts using an angle wrench to step 3.
If no torquing angle wrench is available, the connecting rod screws can be torqued further by the specified angle in a single operation using a
wrench and leverage bar.
Do not use a flexi-rod torque wrench for tightening in order to avoid any angle errors.
BE03.10-P-1000-01D Check Values For Connecting Rod
BE03.10-P-1000-01D Check values for connecting rod
Modification notes
Check values for connecting rod