mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF83.40-P-2180-01Q Automatic Air Conditioning Control and Operating Unit, Task|Page 13539 > < Interior - Interior Damage From Scent Dispensers|Page 13536
Page 1
background image

Control Assembly: Description and Operation
GF83.40-P-2180-01Q Automatic Air Conditioning Control and Operating Unit, Task

GF83.40-P-2180-01Q Automatic Air Conditioning Control And Operating Unit, Task

- 209.3 up to 31.5.04
- except CODE (581b) Convenience automatic air conditioning

Component Identification

Task

The AAC control and operating unit (N22) controls and regulates all air conditioning functions for the vehicle interior.

^

harmonizing the preselected and actual temperatures and controlling the air outlet temperature at the air vents.

^

Automatic switchover of fresh air to recirculated air mode.

^

Electrical actuation of refrigerant compressor.

^

Actuation of the electric suction fan engine and AC with integrated control

The following additional functions are also regulated by the AAC [KLA] control and operating unit (N22) and the required information is forwarded to
the processing control units via the Controller Area Network Bus Class B (interior) (CAN-B):

^

Heated rear window

^

Stationary heater (on vehicles with code (228) stationary heater)

The AAC control and operating unit (N22) performs the following system actuations:

^

Via the CAN-B:
refrigerant compressor; coolant circulation pump; engine and AC electric suction fan with integrated control

^

Via the A/C bus:
blower regulator; 6 stepper motors for air distribution

The following sensor signal is transmitted by the AAC [KLA] control and operating unit (N22) via the CAN-B:

^

Dew point temperature (the left door control unit and the right door control unit read in this value to implement a demand based heated outside
mirror)

The following sensor signals are read in by the AAC pushbutton control unit (N22):

^

Installed sensor: in-car temperature sensor (N22b1)

^

Direct: evaporator temperature sensor

^

Via the CAN-B:
-

outside temperature display temperature sensor; refrigerant pressure and temperature sensor

-

battery voltage; coolant temperature sensor; engine speed (by the EIS [EZS] control unit)

-

vehicle speed (by the instrument cluster)

^

Via the A/C bus:
-

air humidity sensor

GF83.40-P-2180-01Q Automatic Air Conditioning Control and Operating Unit, Task|Page 13539 > < Interior - Interior Damage From Scent Dispensers|Page 13536