mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF83.40-P-2181-01Q Control and Operating Unit Comfort Automatic Air Conditioning, Task|Page 13580 > < A/C - Control Module/Control Functions/Diagnostics
Page 1
background image

Control Module HVAC: Description and Operation
GF83.40-P-2181-01Q Control and Operating Unit Comfort Automatic Air Conditioning, Task

GF83.40-P-2181-01Q Control And Operating Unit Comfort Automatic Air Conditioning, Task

- 209.3 up to 31.5.04
- with CODE (581b) Convenience automatic air conditioning

Component Identification

Task

The comfort AAC control and operating unit (N22/7) controls and regulates all air conditioning functions for the vehicle interior.

^

harmonizing the preselected and actual temperatures and controlling the air outlet temperature at the air vents.

^

Automatic switchover of fresh air to recirculated air mode.

^

Electrical actuation of refrigerant compressor.

^

Actuation of the electric suction fan engine and AC with integrated control

The following additional functions are also regulated by the comfort AAC [KLA] control and operating unit (N22/7) and the required information is
forwarded to the processing control units via the Controller Area Network Bus Class B (interior) (CAN-B).

^

Heated rear window

^

Stationary heater (on vehicles with code (228) stationary heater)

The comfort AAC control and operating unit (N22/7) performs the following system actuations:

^

Via the CAN-B: refrigerant compressor; coolant circulation pump; engine and AC electric suction fan with integrated control

^

Via the A/C bus: blower regulator; 10 stepper motors for air distribution

The following sensor signal is transmitted by the comfort AAC (C-AAC [K-KLA]) control and operating unit (N22/7) via the CAN-B:

^

Sun sensor values (the overhead operating unit reads in these values for the automatic light control in order to achieve a better redundancy for the
system))

^

Dew point temperature (the left door control unit and the right door control unit read in this value to implement a demand- based heated outside
mirror)

The following sensor signals are received by the convenience AAC pushbutton control unit (N22/7):

^

Installed sensor: in-car temperature sensor (N22/7b1)

^

direct: evaporator temperature sensor

^

via the CAN B: outside temperature display temperature sensor; refrigerant pressure and temperature sensor

^

via the electronic ignition switch control unit: battery voltage; coolant temperature sensor; engine speed

^

via the instrument cluster: vehicle speed

^

via the A/C bus: C-AAC sun sensor (4 in total); C-AAC [KKLA] multifunction sensor

The comfort AAC (C-AAC [K-KLA]) control and operating unit (N22/7) reads in the window and door positions as well as the tilting/sliding roof

GF83.40-P-2181-01Q Control and Operating Unit Comfort Automatic Air Conditioning, Task|Page 13580 > < A/C - Control Module/Control Functions/Diagnostics