CLK 320 (209.365) V6-3.2L (112.955) (2004)
Brake Pad Wear Sensor: All Technical Service Bulletins
Brakes - 'Brake Wear Visit Workshop' Message Displayed
Date: November 9, 2007
Order No.: P-B-42.10/85
Supersedes:
Group: 42
SUBJECT:
Model 209.365/375/376, VIN Range F109075 up to F109172
"Brake Wear! Visit Workshop!" Displayed in Instrument Cluster without Obvious Cause
If you receive customer reports in the above model vehicles of the message "Brake Wear! Visit Workshop" displayed within the instrument cluster's
multifunction display and the warning lamp for brake lining wear illuminates, the electrical harness for the brake lining wear sensor may be chafed. The
chafe may be the result of a misrouted wire harness. Inspect the front sensor's wire harness for correct routing and ensure that the harness is installed in
the retaining clip (Figure 1 and 2). Additionally inspect the sensor's harness in the area of the retaining clip for chafes. If the harness shows indication of
chafing, replace the brake wear lining sensor. Refer to WIS documents AR42.10-P-1600PF and AH42.10-P-0003-01A.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
November 9, 2007. Please refer to Netstar -> Star TekInfo --> Star Time for the most current labor time allowance.