mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Comand System Function|Page 10003 > < Comand System Function|Page 10001
Page 10
background image

then appears on the display. When the vehicle is outside of the map boundaries (e.g. driving in foreign country) "NO MAP" appears on the display.
Destinations outside of the digitized map area cannot be considered when calculating the route.

Driving around traffic jams with the function button "Detour" 

When a traffic jam is announced by the traffic station a route which avoids driving through the traffic jam can be calculated before reaching the affected
section. For this purpose press the "Detour" button and either:

-

Enter length of traffic jam including the distance to the start of the traffic jam or and either

-

Delete the corresponding road section in the detailed route list.

In contrast to the "Dynamic guidance" feature, the "Detour" feature is also available for federal and state highways as well as in the intercity area.

Guidance

Digitized and non-digitized CD-ROM map area

Digitized CD-ROM map area:

-

Vehicle located inside of digitized CD-ROM map area

Non-digitized CD-ROM map area:

[] Vehicle located outside of CD-ROM map boundaries ("OFF MAP", foreign country)
() Vehicle located inside of CD-ROM map boundaries, however outside of digitized map area ("OFF ROAD", company ground, country road, ...)

NOTE:  The network of roads is shown highly simplified

Guidance consists of making up and outputting driving recommendations to guide the driver to the desired destination. Prerequisites for guidance
include:

-

continuous location finding in operation (accomplished automatically),

-

destination entered and

-

route calculated.

The navigation processor (A40/3n2) continuously compares the data from the route calculation with the data from the continuous location finding
operation and derives the measures required for further guidance. Depending on the vehicle location there are two types of guidance (see figure):

-

Guidance inside of digitized CD-ROM map area and

-

limited guidance outside of digitized CD-ROM map area.

Guidance In Digitized MAP Area

When driving within the digitized map area the following information is calculated by the navigation processor (A40/3n2) and is available for the driver:

-

Current position and route of vehicle on digital map (illustrated graphically)

-

Route list

-

Distance to destination and estimated time of arrival

Comand System Function|Page 10003 > < Comand System Function|Page 10001