CLK 320 Cabriolet (208.465) V6-3.2L (112.940) (2000)
PSE Control Module (Pneumatic System Equipment): Service and Repair
Removal And Installation Of PSE Control Module (A37/2-A37/5)
1
Remove paneling right side of trunk
2
Pull foam cube (1) out of right trunk recess and open
3
Remove PSE control module (A37) from foam cube (1)
4
Disconnect electrical connectors from PSE control module
5
Disconnect module plug from PSE control module
-
For this purpose pull release retainer (arrow)
6
Check PSE control module for proper electrical function
7
Check PSE control module for proper pneumatic function
8
Reinstall in opposite order
NOTE: If the PSE control module is replaced it is necessary to perform version coding with the HHT.