CLK 320 Cabriolet (208.465) V6-3.2L (112.940) (2000)
NOTE: Disconnect electrical leads and pneumatic lines
2
Unscrew screws (4) and remove motor
Screw for seat adjustment motor - 4 N.m
NOTE: Remove only defective motors
3
Expose electrical lead and disconnect corresponding connector on control module
4
Reinstall in opposite order
5
Check for proper function
Front Seat With Semi-Electric Seat Adjustment
Removing And Installing Front Power Seat Motor Group (Seat Cushion)
1
Remove front seat
NOTE: Disconnect electrical connectors
2
Expose electrical lead and disconnect corresponding connector (1 or 2) from control module
NOTE: Only lead and connector on corresponding motor
3
Unscrew screws (3) from corresponding motor and remove motor
NOTE: Installation: Ensure that drive gear is seated correctly
Screw for seat adjustment motor - 4 N.m
4
Install in opposite order
Remove/Install Front Seat (Cushion) Adjusting Motors