CLK 320 Cabriolet (208.465) V6-3.2L (112.940) (2000)
Example 2
Measurement:
Expanded dimension correct, but the gear backlash is too large.
Correction:
A locking ring which is thinner by the missing amount is to be installed on the left assembly side.
A locking ring which is thicker by the missing amount is to be installed on the right assembly side (crown wheel side).
Proceed in the reverse order if the gear backlash is too small.
g. The adjustment of the tapered roller bearings and the gear set is in order if the expanded dimension (expansion) of the rear axle housing and
the gear backlash is within the range of the specified values