CLK 350 (209.356) V6-3.5L (272.960) (2008)
Sunroof / Moonroof Cable: Service and Repair
AR77.20-P-1400Q Remove/Install Control Cable
- with CODE (414a) Electric glass sliding/pop-up roof
DANGER!
Risk of injury to fingers being jammed or squeezed when removing and installing or aligning hoods, doors, trunk lid/tailgate or sliding roof.
-
When moving components, ensure that no body parts or limbs are within the operating range of moving parts.
1
Remove water drain funnel
2
Remove sliding roof drive
NOTE:
Installation: Displace tilting bracket (4) until the edge of lever (6) is matched with tip (7), then install sliding roof drive.
3
Unscrew screws (1)
4
Unscrew screw (2)
5
Remove cover (3)
6
Push tilting bracket (4) approx. 10 cm toward rear.
7
Pull out control cable (5) toward rear
8
Install in the reverse order
9
Check for proper function