CLK 350 (209.356) V6-3.5L (272.960) (2008)
Component Identification
Opening sequence on 1, 2 or 4 piston brake calipers on front axle
Component Identification
Opening sequence for 6-piston brake calipers on front axle
1
Adjust bleeding pressure at brake fluid changing unit to 2.0 bar.
2
Remove dust caps of bleed screws (1, 2, 3, 4, 5, 6) on the brake calipers.
3
Open bleed screw (1) and allow approx. 80 cm3 of brake fluid to flow out via the bleed hose.
New brake fluid must flow out free of bubbles
4
Close bleed screw (1) and pull off bleed hose.
5
Repeat process at the bleed screws (2, 3, 4, 5, 6).