CLK 350 (209.356) V6-3.5L (272.960) (2008)
Illustrated On Model 203 Without 4MATIC: Measurement On Front Axle
Illustrated: Measurement On Rear Axle
1
Prepare for chassis alignment check
NOTE: Following repair work forcefully move vehicle up and down several times before measuring.
2
Check vehicle level on front axle via cross strut inclination.
CAUTION: The connecting cable (086b) of the measurement sensor (086a) must point towards the center of the vehicle otherwise a
faulty measurement occurs.
Fit measurement sensor (086a) and save each measured value.
-
Measurement point 1 (left front)
-
Measurement point 2 (right front)
-
Vehicle level - front axle
2.2 Check vehicle level at front axle via transverse control arm inclination
CAUTION: The connecting cable (086b) of the measurement sensor (086a) must point towards the center of the vehicle otherwise a
faulty measurement occurs.
Fit measurement sensor (086a) and save each measured value.
-
Measurement point 1 (left front)
-
Measurement point 2 (right front)
-
Vehicle level - front axle
3
Check vehicle level at the rear axle via the rear axle shaft inclination.