CLK 350 (209.356) V6-3.5L (272.960) (2008)
AR35.31-P-0540-05CA Pressing off, pressing in radial seal at side of rear axle housing
Special tool allocation
Drift 126 589 00 15 00 for rear axle differential [diameter] 185 mm
Drift 211 589 00 15 00 for rear axle differential [diameter] 187 mm, 198 mm and 200 mm
Drift 140 589 06 15 00 for rear axle differential [diameter] 210 mm
Drift 211 589 05 15 00 for rear axle differential [diameter] 215 mm
Special Tools
Pushing off
Rear axle center assembly without side bearing cover.
1
Use suitable screwdriver to press radial sealing ring (32a) out of housing.
Shown on rear axle differential 0 198 mm in assembly stand
Component Identification
Pressing in
2
Coat new radial sealing ring (32a) on sealing lip with oil.
3
Press in radial sealing ring (32a) using a drift (032c).
Press radial sealing ring (32a) evenly into the housing to prevent leaks.
Shown on rear axle differential dia. 198 mm