CLK 350 Cabriolet (209.456) V6-3.5L (272.960) (2006)
Convertible Top Position Sensor / Switch: Service and Repair
AR77.39-P-3700QA Remove/Install Soft Top Bow (Down/Up) Limit Switch
DANGER!
-
Injury hazard from roll bar extending
-
Before working in the area of the roll bar pull rear head restraints out by hand.
-
Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.
-
Keep body parts and limbs well clear of moving parts.
1
Cover vehicle in rear area
NOTE: To prevent scratching the paint during assembly work.
2
Close soft top
NOTE: Leave soft top bow and soft top compartment cover in upright position
3
Unclip safety bolts (4) and remove soft top bow hydraulic cylinder (5).
4
Lay soft top bow hydraulic cylinder (5) down
NOTE: To achieve better accessibility to soft top bow limit switch
5
Separate connector (1)
6
Unscrew bolt (2)
7
Unclip soft top bow limit switch (up/down) (S84/15) from soft top bow (3).
8
Unclip soft top bow limit switch (up/down) (S84/15) from soft top support (6) and remove from vehicle
9
Install in reverse order