CLK 350 Cabriolet (209.456) V6-3.5L (272.960) (2006)
These plugs are used in five locations on the pump. On the front of the pump are the sealing plugs for valve M10 (Figure 3, 1), BARA pressure gauge
connection (Figure 3, 2) and emergency operation port (Figure 3, 3). On the back of the pump are the sealing plugs for valve M10 (Figure 4, 4) and
valve M14 (Figure 4, 5). Be sure to inspect all sealing plugs for leakage. For replacement of leaky sealing plugs, refer to WIS document
AR77.37-P-3503QA.
Parts Information
NOTE:
The following allowable labor operations should be used when submitting a warranty claim for this repair
In Case of Warranty
Operation: Short test, perform (54-1011)
Screw plugs of hydraulic unit for convertible top system, replace (after check) (77-4118)