mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR29.10-P-0300Q Remove/Install Pedal Assembly|Page 11756 > < AR29.10-P-0300Q Remove/Install Pedal Assembly
Page 2
background image

DANGER:

-

Risk of death. Death may result if vehicle slips or topples from the lifting platform.

-

Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.

-

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte.Risk of Injury through
burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

-

No fire, sparks, naked flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only
into suitable and appropriately marked containers.

1

Disconnect ground cable of battery

DANGER:
-

Risk of poisoning from swallowing brake fluid. Risk of injury from brake fluid coming into contact with skin and eyes.

-

Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling
brake fluid.

NOTE:  Notes on externally invisible brake fluid loss

2

Remove cover below instrument panel (on left)

3

Remove sound absorber (7)

4

Remove cover (6).

5

Suction off brake fluid from expansion reservoir

NOTE:  Suction off brake fluid as far as the connection of the connector hose (8).

6

Pull the connector hose (8) off the expansion reservoir

7

Detach lower engine compartment paneling

NOTE:  Only remove the rear section

8

Remove bottom sections of noise encapsulation

AR29.10-P-0300Q Remove/Install Pedal Assembly|Page 11756 > < AR29.10-P-0300Q Remove/Install Pedal Assembly