CLK 350 Cabriolet (209.456) V6-3.5L (272.960) (2006)
/v6-3.5l_(272.960)/Page-2637001.png)
Brake Fluid: Description and Operation
AH42.50-P-0001-01A Brake fluid notes
^
Do not allow brake fluid to come into contact with vehicle paintwork, as it contains ingredients that act as solvents on the paint. Should brake fluid
come into contact with the paint despite all precautions, the moistened surface must be flushed immediately with a lot of water (do not rub off
brake fluid).
^
Brake fluid is highly hygroscopic, i.e. it absorbs humidity which reduces its boiling point. Brake fluid must therefore only be stored in properly
sealed reservoirs (original container) in order to avoid moisture absorption via the air humidity. A boiling point which is reduced as a result can
lead to problems up to the total failure of the brake system at high operating temperatures.
^
Used brake fluid must not be re-used.
^
Brake fluid is colorless to yellow colored and is therefore easily confused with mineral oil products. Therefore only remove brake fluids from
original containers and store separately from mineral oils and other fluids.
^
For disposal notes for the location area Federal Republic of Germany see:
"Environmental Manual for Motor Vehicle Repair Operations" Publisher: Association of the German Automotive Industry e.V. (VIDA)
60625 Frankfurt am Main, Westendstraße 61
