mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF83.40-P-2180-01QB Automatic Air Conditioning Control and Operating Unit, Task|Page 14061 > < Interior - Interior Damage From Scent Dispensers|Page 14058
Page 1
background image

Control Assembly: Description and Operation
GF83.40-P-2180-01QB Automatic Air Conditioning Control and Operating Unit, Task

GF83.40-P-2180-01QB Automatic Air Conditioning Control And Operating Unit, Task

- 209.3/4 as of 1.6.04
- except CODE (581) Comfort automatic air conditioning

Component Identification

Task

The AAC [KLA] control and operating unit (N22) controls and regulates all climate control functions for the vehicle interior:

^

Equalizing the temperatures that are preselected and actually present and adjusting the air outlet temperature at the air outlets,

^

Automatic switchover from fresh air to air recirculation mode,

^

Electrical actuation of refrigerant compressor,

^

Operating the engine/AC electric suction fan with integrated control

The following additional functions are also regulated by the AAC [KLA] control and operating unit (N22) and the required information is forwarded to
the processing control units via the interior CAN (CAN B):

^

Heated rear window (HHS)

^

Stationary heater (STH) (for vehicles with code (228) Stationary heater)

The AAC control and operating unit (N22) is used to actuate the following:

^

via the interior CAN (CAN B):
-

Refrigerant compressor

-

Heater circulation pump

-

Engine and air conditioning electrical suction fan with integrated control

-

Heated rear window

^

via the AC bus:
-

Blower regulator

-

Actuator motors for the air distribution

The following sensor signals are read in by the AAC control and operating unit (N22):

^

Built-in sensor: in-car temperature sensor (N22b1)

^

direct: evaporator temperature sensor

^

via the AC bus: Air humidity sensor (up to 28.6.06)

The AAC [KLA] control and operating unit (N22) reads in the following signals from the interior CAN (CAN B):

^

By the front SAM control unit with fuse and relay module:
-

Outside temperature display temperature sensor

-

Refrigerant pressure and temperature sensor

^

By the EIS [EZS] control unit:
-

Battery voltage

-

Coolant temperature

-

Engine speed

^

By the instrument cluster:

GF83.40-P-2180-01QB Automatic Air Conditioning Control and Operating Unit, Task|Page 14061 > < Interior - Interior Damage From Scent Dispensers|Page 14058