mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Recall - ECM Update For EVAP Diagnostics|Page 9477 > < Recall - ECM Update For Various Issues|Page 9472
Page 1
background image

Technical Service Bulletin # 2009060005

Date: 090807

Recall - ECM Update For EVAP Diagnostics

FILE: 
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION  PARTS & ACCESSORIES BINDER

Campaign No. 2009060005, August 2009

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT: 
Models 164, 171, 203, 209, 251

Model Years 2005 - 2007

Software Calibration Number (SCN) Coding - Engine Control Module This Recall Campaign has been initiated because Daimler AG (DAG), the
manufacturer of Mercedes-Benz vehicles, has determined that between May, 2006 and June, 2007, due to a software error, the vehicles fuel tank leak
diagnosis system may have been inadvertently deactivated during a visit to the workshop. This may cause the affected vehicles to fail to meet the
statutory requirements for Inspection/Maintenance (emissions inspection). Dealers will re-code the Software Calibration Number (SCN) - Engine
Control Module to correct this situation.

Shown in this bulletin is sample copy of a letter which owners of the affected vehicles will receive.

Prior to performing this Recall Campaign:

Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.

Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described.

Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

Approximately 12,848 vehicles are involved.

Warranty Information 

NOTE REGARDING CUSTOMER REIMBURSEMENT

Reimbursement to customers for repairs performed prior to this recall: If the customer already paid to have this recall campaign condition repaired and
provides adequate documentation to support their claim of a non-warranty repair of this item, they may be eligible to receive reimbursement. 

Requests for reimbursement may include parts, labor, fees and taxes. Reimbursement is limited to the amount the repair of a non illuminating check
engine malfunction indicator lamp (MIL would have cost if completed by an authorized Mercedes-Benz dealer under this campaign.

Submit a warranty claim, utilizing Damage Code 54952468 as a sublet, utilizing the sublet code of "SUB." Sublet repairs require dealer text as stated in
the Warranty Policies and Procedures Manual. Repair date should be the date that the customer paid for the repair.

Note:

Please note the claim submitted for customer reimbursement will not close the campaign (if still open). If the customer is still in possession of the vehicle
with an open campaign, please arrange to close the campaign in the usual manner as described in this bulletin. this bulletin.

Procedure

Note:

^ Use DAS/XENTRY 06/09 with all associated patches or higher.

Recall - ECM Update For EVAP Diagnostics|Page 9477 > < Recall - ECM Update For Various Issues|Page 9472