CLK 350 Cabriolet (209.456) V6-3.5L (272.960) (2006)
11. Slide on new sealing ring (7) with aid of centering cone (8 ) of assembly aid.
12. Plug hydraulic lines with set of stop plugs to protect against soiling.
Connect hydraulic lines to hydraulic pump
13. Remove set of stop plugs from hydraulic line connections and hydraulic lines
14. Manually press hydraulic lines into hydraulic pump connections to stop
Hydraulic lines should be installed separately and should never be pressed into hydraulic pump with aid of terminal plate (4).
15. Position connection plate (4) and tighten with bolts
Observe tightening torque for bolts.
16. Check oil level of hydraulic system, if necessary correct oil level.
Observe tightening torque for oil filler screw.
17. Remove hydraulic oil residues from hydraulic pump and hydraulic lines.