CLK 430 (208.370) V8-4.3L (113.943) (1999)
Fuel Door Release Actuator: Service and Repair
Removing And Installing Tank Flap Actuator
1
Remove pneumatic system equipment control module
NOTE: Do not remove PSE control module from foam rubber cube, do not disconnect pneumatic and electrical lines
2
Press retaining lug (arrow) and remove tank flap actuator (1) from holder
3
Remove tank flap actuator (1)
4
Pry off pneumatic line (2) with open end wrench (7 mm)
5
Reinstall in opposite order
NOTE: Installation of the tank flap actuator (1) is only possible in one position