CLK 430 (208.370) V8-4.3L (113.943) (1999)
Model 208
Removal, installation
1
Disconnect ground lead from battery
CAUTION: On model 210 insulate the ground lead with cable terminal to prevent unintentional contact between disconnected ground
lead and ground point W10
2
Remove instrument cluster
3
Unclip retaining lugs (arrows)
NOTE: Retaining lugs must catch completely
4.1 Separate housing (64) from electronic board with instruments (65)
NOTE: On model 202 as of 08/95 ensure that reset knob for trip odometer and adjustment knob for electronic clock are properly positioned.
4.2 Separate housing (64) from electronic board with instruments (65)
NOTE: On model 208 ensure correct seat of rubber inserts (62)
5
Remove symbol strips (66)
NOTE: On model 202 up to 08/95 pull symbol strips out to side
-
On model 202 as of 09/95, model and model 210 pull symbol strips out toward bottom
-
On model 208 unclip plastic insert (63) at bottom of instrument cluster housing, pull back slightly and remove symbol strips downward.
NOTE: When replacing symbol strips pay attention to vehicle equipment
6
Reinstall in opposite order