mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

COMAND(R) System - Incorrect ETA Calculation Displayed|Page 531 > < Diagram Information and Instructions|Page 524
Page 1
background image

Body Control Module: Technical Service Bulletins
COMAND(R) System - Incorrect ETA Calculation Displayed

Date: September 13, 2001

Order No.: P-B-82.85/170

Supersedes:

Group: 82

SUBJECT:
All Models With COMAND

Estimated Time Of Arrival Calculation Is 12 hours Longer Than Actual ETA

It is possible that during Navigation route guidance COMAND might calculate the ETA 12 hours longer than actual ETA. This symptom if it arises most
likely would occur when the route guidance will pass through noon time. This symptom does not occur when the clock on COMAND is set to the
24-hour time mode. If you encounter this condition, do not replace the COMAND unit. The condition can be addressed if the customer consents to
setting the COMAND unit to the 24-hour time mode. The supplier is currently working on a software update to address the symptom in the standard time
mode. This DTB will be amended when the software is available.

COMAND(R) System - Incorrect ETA Calculation Displayed|Page 531 > < Diagram Information and Instructions|Page 524