mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR62.30-P-1600-01E Separating Front Spring Support|Page 8051 > < AR32.20-P-0300C Remove/Install Torsion Bar on Front Axle|Page 8045

CLK 430 (208.370) V8-4.3L (113.943) (1999)

  • Steering and Suspension
  • Suspension
  • Strut / Shock Tower
  • Front Strut / Shock Tower
  • System Information
  • Service and Repair
  • AR62.30-P-1600-01E Separating Front Spring Support

Page 1
background image

Front Strut / Shock Tower: Service and Repair
AR62.30-P-1600-01E Separating Front Spring Support

AR62.30-P-1600-01E Separating Front Spring Support

Special Tools

Commercially Available Tools

Workshop Equipment

1. Separate both welds between front spring support (77) and longitudinal member (37, arrows).
2. Cut out spot welds from front spring support (77, arrows).

  • Steering and Suspension
  • Suspension
  • Strut / Shock Tower
  • Front Strut / Shock Tower
  • System Information
  • Service and Repair
  • AR62.30-P-1600-01E Separating Front Spring Support

AR62.30-P-1600-01E Separating Front Spring Support|Page 8051 > < AR32.20-P-0300C Remove/Install Torsion Bar on Front Axle|Page 8045